310 10 * 1mm Bafani ba li-tubing tsa tšepe tse sa hloekang tse kopantsoeng
Tlhaloso
310 10 * 1mm Bafani ba li-tubing tsa tšepe tse sa hloekang tse kopantsoeng
Kereiti | 301 ,304 ,304L ,316 ,316L ,309 S,310 ,321 |
Standard | ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441 |
Botenya | 0.2-10.0mm |
Bophara | 600mm min |
Bolelele | 2000mm-8000mm kapa joalo ka kopo ea bareki |
Qetello ea bokaholimo | NO1,No.4,2B, BA, 6K, 8K, Hair Line e nang le PVC |
Sebopeho sa Lik'hemik'hale
Kereiti | C | Si | Mn | P≤ | S≤ | Cr | Mo | Ni | Tse ding |
301 | ≤0.15 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18 | - | 6.0 | - |
304 | ≤0.07 | ≤1.00 | ≤2.00 | 0.035 | 0.03 | 17-19 | - | 8.0 | - |
304L | ≤0.075 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 17-19 | - | 8.0 | |
309S | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 22-24 | - | 12.0 | - |
310 | ≤0.08 | ≤1.5 | ≤2.00 | 0.045 | 0.03 | 24-26 | - | 19.0 | - |
316 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18.5 | 2 | 10.0 | - |
316L | ≤0.03 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18 | 2 | 10.0 | - |
321 | ≤0.12 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 17-19 | - | 9.0 | Te≥5×C |
Thepa ea Mechini
Kereiti | YS(Mpa) ≥ | TS (Mpa) ≥ | El (%) ≥ | Ho thatafala(HV) ≤ |
301 | 200 | 520 | 40 | 180 |
304 | 200 | 520 | 50 | 165-175 |
304L | 175 | 480 | 50 | 180 |
309S | 200 | 520 | 40 | 180 |
310 | 200 | 520 | 40 | 180 |
316 | 200 | 520 | 50 | 180 |
316L | 200 | 480 | 50 | 180 |
321 | 200 | 520 | 40 | 180 |
Ngola molaetsa wa hao mona mme o re romele wona