304 Ts'epe e sa hloekang e kopantsoeng ka tube /tubing
Tlhaloso e qaqileng ea sehlahisoa
304 Ts'epe e sa hloekang e kopantsoeng ka tube /tubing
1. Tlhaloso: Coil tube / tubing ea tšepe e sa hloekang
2. Mofuta: o cheselitsoe kapa o se na seamless
3. Tekanyetso: ASTM A269, ASTM A249
4. Coil tube ea tšepe e sa hloekang OD: 6mm ho 25.4MM
5. Bolelele: 600-3500MM kapa ho ea ka tlhokahalo ea moreki.
6. Botenya ba lebota: 0.2mm ho 2.0mm.
7. Mamello: OD: +/-0.01mm;Botenya: +/-0.01%.
8. Coil ka hare ho lesoba boholo: 500MM-1500MM (e ka fetoloa ho ea ka litlhoko tsa bareki)
9. Bophahamo ba coil: 200MM-400MM (e ka fetoloa ho latela litlhoko tsa bareki)
10. Bokaholimo: E khanyang kapa e khaotsoe
11. Boitsebiso: 304, 304L, 316L, 321, 301, 201, 202, 409, 430, 410, motsoako oa 625, 825, 2205, 2507, joalo-joalo.
12. Ho paka: mekotla e lohiloeng ka mokotla oa lepolanka, pallet ea lehong, shaft ea lehong, kapa ho latela tlhoko ea moreki.
13. Teko : karolo ea lik'hemik'hale, matla a ho hlahisa, matla a thata, tekanyo ea boima
14. Tiisetso: Tlhahlobo ea motho oa boraro (mohlala :SGS TV ), joalo-joalo.
15. Kopo: Mokhabiso, thepa ea ka tlung, lipalangoang tsa oli, mocheso oa mocheso, ho etsa litšepe, ho etsa pampiri, koloi, ho lokisa lijo, bongaka, joalo-joalo.
Lintho tse bonahalang | ASTM A269 Sebopeho sa Lik'hemik'hale % Max | ||||||||||
C | Mn | P | S | Si | Cr | Ni | Mo | NB | Nb | Ti | |
TP304 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 | ^ | ^ | ^ . | ^ |
TP304L | 0.035 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-12.0 | ^ | ^ | ^ | ^ |
TP316 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ^ | ^ | ^ |
TP316L | 0.035 D | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-15.0 | 2.00-3.00 | ^ | ^ | ^ |
TP321 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-12.0 | ^ | ^ | ^ | 5C -0,70 |
TP347 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-12.0 | 10C -1.10 | ^ |
Lintho tse bonahalang | Phekolo ea mocheso | Mocheso F (C) Min. | Ho thatafala | |
Brinell | Rockwell | |||
TP304 | Tharollo | 1900 (1040) | 192HBW/200HV | 90HRB |
TP304L | Tharollo | 1900 (1040) | 192HBW/200HV | 90HRB |
TP316 | Tharollo | 1900(1040) | 192HBW/200HV | 90HRB |
TP316L | Tharollo | 1900(1040) | 192HBW/200HV | 90HRB |
TP321 | Tharollo | 1900(1040) F | 192HBW/200HV | 90HRB |
TP347 | Tharollo | 1900(1040) | 192HBW/200HV | 90HRB |
OD, inch | OD Tolerance inch(mm) | Mamello ea WT % | Length Tolernace inch(mm) | |
+ | - | |||
≤ 1 / 2 | ± 0.005 ( 0.13 ) | ± 15 | 1 / 8 ( 3.2 ) | 0 |
> 1/2 ~1 1/2 | ± 0.005(0.13) | ± 10 | 1 / 8 (3.2) | 0 |
> 1 1 / 2 ~< 3 1 / 2 | ± 0.010(0.25) | ± 10 | 3 / 16 (4.8) | 0 |
> 3 1 / 2 ~< 5 1 / 2 | ± 0.015(0.38) | ± 10 | 3 / 16 (4.8) | 0 |
> 5 1 / 2 ~< 8 | ± 0.030(0.76) | ± 10 | 3 / 16 (4.8) | 0 |
8 ~ <12 | ± 0.040(1.01) | ± 10 | 3 / 16 (4.8) | 0 |
12 ~ <14 | ± 0.050(1.26) | ± 10 | 3 / 16 (4.8) | 0 |